Re: No thinprint functionality in automated pool via PCOIP available
Hi, i run the commands and got the following error message: Can´t connect to virtual channel (1).Try .print Client on <Hostname>:4000.Try .print Client on <IP>:4000.No suitable client...
View ArticleRe: Nvidia Quadro
Hello Japi, thanks, I saw that you have Module ID: 74 Module Name: nvidiawritten in the hardver info for nvidia quadro 4000. So for you the hardware paired to the loaded nvidia module. I'll try to...
View ArticleRe: View 5.2 Desktop status stops at "startup"
hi there,we've the same issue here! Is there any solution yet? rgds Alex
View ArticleRe: View 5.2 with HW 3D - slow video performance
Hi there,what Pcoip-Client you're using? i've an Dell R720 with Nvidia K1 GPU and 300GB Ram, Intel E5-2690. And LG Clients with Teradici 2321 Chips. Pool:Linked-Clone512 MB VRAM2 GB Ram2vCPU3D Rnd. On...
View ArticleRe: No thinprint functionality in automated pool via PCOIP available
I´ve also create a GPO via the PCOIP template file with the entry "3-enable all virtual channels" and linked this GPO to the vCenter server´s folder and the VDI Container - still the same problem.Could...
View ArticleRe: View 5.2 with HW 3D - slow video performance
Hi, I have no thin client but usual laptop HP EliteBook 8440 with 8 GB RAM and dedicated GPU. JZ
View ArticleRe: Floating Assignment pool and Wyse P25
Hi, I am curious to find out how you actually configured your P25 terminals to bypass the Security Gateway server. Is it simply just using the IP address of Connection Server in the DNS Name or IP...
View ArticleSingle image, dozens of VLANs
I've been retooling a clients View Horizon 5.2 install for the last few months. The basics are this: a VDI cluster in a centrally located data-center and relatively low latency extended LANs to branch...
View ArticleClik here to view.
Re: View 5 and RDP, tunneled or what?
I think you are right. VSG (not VCS) is the intermediary connection between internet clients and the VM desktops on PCoIP or RDP.Regards,Milton
View ArticleClik here to view.
Re: Proof of concept setup
djak44 wrote: Dearl all, I will be installing a view 5 as a proof of concept for my client, because of many reasons I will be doing it in a developement environment, beside sharing some of the services...
View ArticleClik here to view.
Re: How to separate VDI servers and VMs on 2 VLANs ?
You have to route two VLAN for communicating between two VLAN. You can use cisco router for doing this. Here is a reference for configuration in cisco router....
View ArticleClik here to view.
Re: One DHCP server and few subnets
djak44 wrote: I have attached a diagram, maybe the diagram can state the issue better, please have a look at the attached, my question is: how does the DHCP server distinguish between Computer A and...
View ArticleClik here to view.
View Pool feature/design consideration
Hallo Just a quick question on the features for the latest version of View(Horizon View) 5.2 Why don’t VMware create the option to create a tiered type pool setup? Your pool limitation is set to 2 000...
View ArticleView 5.1 and Lync 2010 - Desktop Sharing Really Slow
We are using Lync 2010 in our View 5.1 environment and although it is working we have a issue when sharing the desktop. When you share your desktop the screen refresh rate is very very slow. Anyone...
View ArticleRe: Webcams and Microphones are now generally supported with VMware Horizon...
I have just tested FP2 and ran into some problems. My laptop has an internal webcam but it isn't recognized in the View session. When I plugin an usb webcam, the webcam can be used. Unfortunately I...
View ArticleDisconnect View desktop when idle for 2 hours
Hi, I would like my Horizon View 5.2 desktops to disconnect when idle for 2 hours. I have seen several workarounds, all triggered from within the desktop:a screensaver becoming active after a period of...
View ArticleRe: View 5.1 and Lync 2010 - Desktop Sharing Really Slow
I am not sure that this is supported by Microsoft or VMware, you need to get to the latest versions, View 5.2 with FP2 and Lync 2013 for this to be supported. (...and hopefully working). // Linjo
View ArticleRe: View 5.1 and Lync 2010 - Desktop Sharing Really Slow
Just found this which indicates Lync 2010 is supported. http://blogs.vmware.com/euc/2012/07/microsoft-lync-2010-with-vmware-view-50.html
View ArticleRe: Disconnect View desktop when idle for 2 hours
Other than the global time out value I'm not aware of any of the View options that would assist with booting connected but inactive users.
View ArticleRe: View Pool feature/design consideration
The best place to submit new ideas for a product is the feature request page, http://www.vmware.com/support/policies/feature.html.
View Article