Re: Some View VMs not getting DHCP unless Re-add NIC
Hi, Welcome to the community, and i would like to know if your VMs got an IP address or not ? because it is not clear. Then , do you have some event on your DHCP server ? maybe try to simply restart...
View ArticleRe: thinprint for linkclone
Hi Cyril, Here a great article for troubleshooting Thinprint in VMware view. Try to start with that : http://myvirtualcloud.net/?p=3735 Regards,Julien
View ArticleRe: Some View VMs not getting DHCP unless Re-add NIC
No, the problem VMs do not get DHCP leases. It's not just a matter of clearing out the old DHCP leases and restarting (both of which I've done multiple times) since the NICs don't even work if I assign...
View ArticleRe: Some View VMs not getting DHCP unless Re-add NIC
Ok thank you for the clarifications. And when you assign a static IP are you able to ping two VMs located on the same vswitch for example?Do you have some output to attach like screenshot and log on...
View ArticleRe: Security Server Red and states Unknown
Have a look at this KB, http://kb.vmware.com/kb/2001053.
View ArticlePoor performance compared to desktop with VMware View 5.2
We are pilot testing VMware View 5.2 and the initial feedback from our users is that desktop performance is significantly worse than their regular desktops. Specific complaints: Opening and saving my...
View ArticleSwitch vCenter
Hi@all did anybody switched the vCenter Server underneath a View Environment bevor? I do have a vCenter Server 5.0 with View 5.x and i have to move the vCenter onto a new Windows Server. What are the...
View ArticleRe: Security Server Red and states Unknown
The services that are running are as follows: VMware View Security ServerVMware View PCoIP Secure GatewayVMware View Framework Component I have one service that can't start thats VMware view Blast...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Hi theowood, have you updated the BIOS/Firmware of the Hardware you are using?have you set the energy Option of the Hardware to "static high Performance"? what storage you are using to run the...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Thewood, check as well the Performance within vCenter CPU- Cluster/Host Utilization- VM Utilization- VM % Ready TimeMEMORY- Host Utilization- VM Utilization- Swapping/BalooningSTORAGE- VMs per VMFS...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
We are using memory based storage with a product called Atlantis. It is very fast. Read latency is less than 2ms on average. We are set to static high performance and using the latest firmware...
View ArticleVMware View Connection Server - Error 404
I was getting alarms in vCenter for CPU usage on my view connection server, which I found out was caused by the mysqld service being at 100% CPU utilization. I rebooted the server and when it came back...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Atlantis is a good product.. Here is a nice CPU ready cheat sheetCPU Ready Revisted - Quick Reference Charts - VMtoday
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Thanks, that confirms my calculation. Right now, I have 65 idle 2vCPU virtual desktops on one of the hosts. The virtual desktops are all powered on and running Windows 7. Each virtual machine is...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
How many physical sockets on that server? Your comments lead me to believe it is just one, correct? What generation of Xeon? There are HUGE differences between say, Harpertown based chipsets and...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Brand new HP Proliant DL 560 Generation 8 4 processor (4 socket). Each processor is an Intel Xeon E5-4650@2.7Ghz "Sandy Bridge"
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
So then, with that chipset having 8 cores per socket, you should see 32 physical cores, and 64 logical cores(w/ hyperthreading). Is that what you are seeing when looking at the "Summary" tab on your...
View ArticleClik here to view.
Re: Poor performance compared to desktop with VMware View 5.2
Yep 32 cores. 64 logical cores with hyperthreading. Each core is 2.7GHz
View ArticleRe: user unable to login, "display protocol for this desktop is not available"
I work for a university. We are currently running 5.1 with several pools running linked clones. We recently started running across this error intermittently. The pools are set to PCoIP by default, and...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Yeah, something doesn't see quite right then based on what you are seeing. Can't elaborate at the moment. Perhaps some others will chime in before me.
View Article