Switch vCenter
Hi@all did anybody switched the vCenter Server underneath a View Environment bevor? I do have a vCenter Server 5.0 with View 5.x and i have to move the vCenter onto a new Windows Server. What are the...
View ArticleRe: Security Server Red and states Unknown
The services that are running are as follows: VMware View Security ServerVMware View PCoIP Secure GatewayVMware View Framework Component I have one service that can't start thats VMware view Blast...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Hi theowood, have you updated the BIOS/Firmware of the Hardware you are using?have you set the energy Option of the Hardware to "static high Performance"? what storage you are using to run the...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Thewood, check as well the Performance within vCenter CPU- Cluster/Host Utilization- VM Utilization- VM % Ready TimeMEMORY- Host Utilization- VM Utilization- Swapping/BalooningSTORAGE- VMs per VMFS...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
We are using memory based storage with a product called Atlantis. It is very fast. Read latency is less than 2ms on average. We are set to static high performance and using the latest firmware...
View ArticleVMware View Connection Server - Error 404
I was getting alarms in vCenter for CPU usage on my view connection server, which I found out was caused by the mysqld service being at 100% CPU utilization. I rebooted the server and when it came back...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Atlantis is a good product.. Here is a nice CPU ready cheat sheetCPU Ready Revisted - Quick Reference Charts - VMtoday
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Thanks, that confirms my calculation. Right now, I have 65 idle 2vCPU virtual desktops on one of the hosts. The virtual desktops are all powered on and running Windows 7. Each virtual machine is...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
How many physical sockets on that server? Your comments lead me to believe it is just one, correct? What generation of Xeon? There are HUGE differences between say, Harpertown based chipsets and...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Brand new HP Proliant DL 560 Generation 8 4 processor (4 socket). Each processor is an Intel Xeon E5-4650@2.7Ghz "Sandy Bridge"
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
So then, with that chipset having 8 cores per socket, you should see 32 physical cores, and 64 logical cores(w/ hyperthreading). Is that what you are seeing when looking at the "Summary" tab on your...
View ArticleClik here to view.
Re: Poor performance compared to desktop with VMware View 5.2
Yep 32 cores. 64 logical cores with hyperthreading. Each core is 2.7GHz
View ArticleRe: user unable to login, "display protocol for this desktop is not available"
I work for a university. We are currently running 5.1 with several pools running linked clones. We recently started running across this error intermittently. The pools are set to PCoIP by default, and...
View ArticleRe: Poor performance compared to desktop with VMware View 5.2
Yeah, something doesn't see quite right then based on what you are seeing. Can't elaborate at the moment. Perhaps some others will chime in before me.
View ArticleRe: VMware View Connection Server - Error 404
So since you get a 404 means that something is listening on that port.Could you by mistake have enabled IIS or some other webserver by mistake that listens on 443? // Linjo
View ArticleRe: Feature Pack 2
We are working internally to get FP2 enabled for trial downloads and usage.
View ArticleRe: HP T610 WES8 x64 and Lync VDI plugin
Can you verify the following? 1) "When I login to Lync, Lync is trying to connect local devices, but it never can." Does this mean that your Lync 2013 client running inside your VM does not even...
View ArticleRe: HP T610 WES8 x64 and Lync VDI plugin
Can you also verify it works when using a regular Windows 7 SP1 client desktop? This will indicate whether it is a configuration error or something else.
View ArticleScanner Recommendations PCOIP Zero Client
I have a client who works remotely and currently has a P25 zero client. Scanned images take about 40 minutes per page (yes he let it go to see how long it would take). I had Wyse send me one if their...
View ArticleRe: Connected client history??
thanks for the info.. don't know if this is the right place to ask but when reviewing the VCOPS for view installation guide one of the prerequisites is Verify that you have a valid license key for...
View Article