Re: Customizing HTML access page.
We don't have any tools for editing the page, but the HTML files are not locked, you can open and edit them. (Be sure to save a back up in case you lose your changed during an upgrade.)
View ArticleRe: Copy / Paste doesn't work
I do see that option on the task bar. The problem that I am having is that I can't copy any text into the box. According to the documentation, I should be able to copy text, open "Get copied Text" box...
View ArticleView 5.3: worst PCOIP video performance
Hi, we evaluate View 5.3 and we found some problems with user experience. View 5.2 for us seems better but we can't find explanation: 1-View Agent Direct Connection (VADC) disturb Flash video. This is...
View ArticleRe: View 5.3: worst PCOIP video performance
On #1, Does the flash video looks ok if you go through the connection broker?On #2. In 5.3 we now supporting MMR for Windows 7, maybe that is the difference. What OS are you using on both sides?
View ArticleUpdate view composer to 5.3 error 1603
I've started to upgrade our test environment from 5.2 to 5.3 and the composer upgrade failed removing the old composer in the process. I found this on the vmmsi.logVIEINSTUTIL: Begin...
View ArticleRe: View 5.3: worst PCOIP video performance
Hi, Can you share more details on your environmental setup? Guest OS and Client OS? MMR will not work with flash video, so it is only host side rendering of PCoIP. 1) For VADC, you mention that it...
View ArticleRe: Horizon View Network Design QOS
Hi, I assume you are asking about QoS information for PCoIP and the USB traffic. Please check the PCoIP network optimization guide for more...
View ArticleCan Recompose be automated?
We recently installed Horizon View Administrator 5.2.0 at a client site. We currently have about 14 pools of MS RDP’s moved over to VM HV. These pools are Automated, Linked clone, dedicated and for...
View ArticleRe: Can Recompose be automated?
You can easily use a script for that, I would base it off this one: View Controlled Recompose Script – VMware Labs
View ArticleUpdating NVIDIA VIBS fails with error "Device or resource busy"
Hi, we have come across an error where we are unable to get the density we should be able to on our Nvidia K1 cards. Specifically, with allocating 512MB of Video RAM to desktops, we are not approaching...
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
Try stopping the xorg service:/etc/init.d/xorg stop
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
Ok, that worked to allow me to install the new driver. However, I cannot access GPU resources on the host. When I run 'nvidia-smi list' I get the message: NVIDIA: API mismatch: the NVIDIA kernel module...
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
Also, I did run /etc/init.d/xorg start after the install and it said Xorg 0 through 7 started.
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
Hmm, but when I run xorg status, it says it's not started. I'm going to reboot the host and see if that resolves.
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
Did you download the right driver? There is one for vSphere 5.1 and another for vSphere 5.5
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
Here is the full procedure: To update the NVIDIA GPU VIB, you must uninstall the currently installed VIB and install the new VIB, as described above.To uninstall the currently installed VIB:Stop all...
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
I do have the right download, yes. However I did not run step 5, which could be my problem. I will try and report back. Thanks.
View ArticleRe: Updating NVIDIA VIBS fails with error "Device or resource busy"
If you have bad consolidation ratios I would also recommend to update the vBios on the GPU, you need to contact you oem vendor to get it. (HP, IBM, Dell etc)
View ArticleRe: View 5.3: worst PCOIP video performance
Hi, On the client side, we tested with Windows 7 SP1 and Windows XP SP3, both with VMware View client 5.4. On the VM side, it's Windows 7 SP1, Internet Explorer 10.0.9.We got the same results no matter...
View ArticleRe: Copy / Paste doesn't work
Could you please confirm you have actually copied some ‘text’ in your virtual desktop? Selecting the text, right clicking and "Copy" would be safer than Ctrl+C in the virtual desktop. You can also open...
View Article