Re: Failed to load ThinApp Management support interface
Do you have more than one connection server? Have you tried setting up a different reposiotory to see if that would work?
View ArticleRe: Failed to load ThinApp Management support interface
We have only one connection server. It will be really hard for me to set up another repository - it is production environment and I will need RFC, etc
View ArticleRe: Failed to load ThinApp Management support interface
If you can't setup another environment then you should just go through and double check all of the permissions to rule that out. Then I would open a ticket with VMware to see if they can assist.
View ArticleRe: Migrate existing View Composer DB to a new DB server
Just did this last weekend. I stopped the Composer service, backed up the DB, restored it on the new server, verified login and DB security settings were correct on the new DB server, changed the ODBC...
View ArticleRe: Failed to load ThinApp Management support interface
Do You have somewhere any checklist with permissions?
View ArticleRe: Failed to load ThinApp Management support interface
Here is the admin guide for 5.0 and the thinapp piece starts on page 223. http://pubs.vmware.com/view-50/topic/com.vmware.ICbase/PDF/view-50-administration.pdf
View ArticleRe: Lync 2013 VDI plugin only works with RDP protocol
Hi All, Sorry for the delay in posting this info. We have been able to successfully get the VDI 32-bit Plugin to work on Windows 7-64 bit, Windows 7 32-bit, and Windows 2008 R2 VMs. Also, we have...
View ArticleVDI environment updates/patching
Howdy, Hypothetically speaking, if I were to reboot the servers responsible for our VDI environment without disconnecting/logging off/shutting down any of the clients, would that cause any issues with...
View ArticleClik here to view.
Re: vSGA NVIDIATesla M2070-Q not working with vsphere 5.1
all i was ever able to get from vmware was "not supported in esxi". vmware sead that for a 2070q i would have to get all my support from nvida, nvidia had me re test remotefx (that works) and sent me...
View ArticleRe: Solidworks 2012 - Dell R720 Nvidia K1 Grid GPU Samsung Zero Cleint /...
Ok, this is where I'm at today: Reverted my floating linked clones to use 'no' 3D; turned off the use of the Nvidia Grid card on my pools. I have extremely limited use of the Grid card, but my initial...
View ArticleRe: Solidworks 2012 - Dell R720 Nvidia K1 Grid GPU Samsung Zero Cleint /...
vSGA will not fit all usecases, maybe vDGA is a better solution for this user?Just to make sure, are you on the latest patch-levels of vSphere? There have been graphics corruption bugs that have been...
View ArticleDefault Playback Device Bug?
Hello We are using View 5.1.2, vSphere 5.1, Windows 7 x64 SP1 virtual desktops, PCoIP... When no USB devices are plugged in the default Playback device shown in Control Panel is VMware Virtual Audio...
View ArticleRe: Lync 2013 VDI plugin only works with RDP protocol
Thanks for the info J_rodstein!Am I mistaken here with your last finding of the Lync Client?In the documentation from vmware it says:Customers receive a copy of Microsoft Lync Client 2013 as part of...
View ArticleRe: Failed to load ThinApp Management support interface
I checked it, all permission are ok, as in guide
View ArticleRe: VDI environment updates/patching
HI, After windows upgrade on VMware view connection server, you should be able to connect desktop back ( linked clone ). If you are saying that after reboot you could not connect back to linked clone...
View ArticleRecompose, Refresh and Rebalance take 60 minutes to start
Hi All.VMware Vcenter 5.1, ESXi hosts 5.1, VMware View 5.2 , VMware View Composer 5.2 ( collocated with VCenter ) Any view composer task starting after 60 minutes. Whats happening?
View ArticleRe: Lync 2013 VDI plugin only works with RDP protocol
Hi essisim, No Mistake. If you have Lync 2013 client installed on your laptop or PC and try to connect to a VM, the Lync VDI plugin will not work. I suspect they share common DLL files. I hope MS...
View ArticleRe: Recompose, Refresh and Rebalance take 60 minutes to start
Do you see this same behavior with power on task started by View?
View ArticleRe: Recompose, Refresh and Rebalance take 60 minutes to start
No just view composer operations take 60 minutes. Reset, Power On and other task are ok.
View Article